Up to date

This page is up to date for Godot 4.3. If you still find outdated information, please open an issue.

PerformanceΒΆ

Inherits: Object

Exposes performance-related data.

DescriptionΒΆ

This class provides access to a number of different monitors related to performance, such as memory usage, draw calls, and FPS. These are the same as the values displayed in the Monitor tab in the editor's Debugger panel. By using the get_monitor method of this class, you can access this data from your code.

You can add custom monitors using the add_custom_monitor method. Custom monitors are available in Monitor tab in the editor's Debugger panel together with built-in monitors.

Note: Some of the built-in monitors are only available in debug mode and will always return 0 when used in a project exported in release mode.

Note: Some of the built-in monitors are not updated in real-time for performance reasons, so there may be a delay of up to 1 second between changes.

Note: Custom monitors do not support negative values. Negative values are clamped to 0.

MethodsΒΆ

void

add_custom_monitor(id: StringName, callable: Callable, arguments: Array = [])

Variant

get_custom_monitor(id: StringName)

Array[StringName]

get_custom_monitor_names()

float

get_monitor(monitor: Monitor) const

int

get_monitor_modification_time()

bool

has_custom_monitor(id: StringName)

void

remove_custom_monitor(id: StringName)


EnumerationsΒΆ

enum Monitor: πŸ”—

Monitor TIME_FPS = 0

The number of frames rendered in the last second. This metric is only updated once per second, even if queried more often. Higher is better.

Monitor TIME_PROCESS = 1

Time it took to complete one frame, in seconds. Lower is better.

Monitor TIME_PHYSICS_PROCESS = 2

Time it took to complete one physics frame, in seconds. Lower is better.

Monitor TIME_NAVIGATION_PROCESS = 3

Time it took to complete one navigation step, in seconds. This includes navigation map updates as well as agent avoidance calculations. Lower is better.

Monitor MEMORY_STATIC = 4

Static memory currently used, in bytes. Not available in release builds. Lower is better.

Monitor MEMORY_STATIC_MAX = 5

Available static memory. Not available in release builds. Lower is better.

Monitor MEMORY_MESSAGE_BUFFER_MAX = 6

Largest amount of memory the message queue buffer has used, in bytes. The message queue is used for deferred functions calls and notifications. Lower is better.

Monitor OBJECT_COUNT = 7

Number of objects currently instantiated (including nodes). Lower is better.

Monitor OBJECT_RESOURCE_COUNT = 8

Number of resources currently used. Lower is better.

Monitor OBJECT_NODE_COUNT = 9

Number of nodes currently instantiated in the scene tree. This also includes the root node. Lower is better.

Monitor OBJECT_ORPHAN_NODE_COUNT = 10

Number of orphan nodes, i.e. nodes which are not parented to a node of the scene tree. Lower is better.

Monitor RENDER_TOTAL_OBJECTS_IN_FRAME = 11

The total number of objects in the last rendered frame. This metric doesn't include culled objects (either via hiding nodes, frustum culling or occlusion culling). Lower is better.

Monitor RENDER_TOTAL_PRIMITIVES_IN_FRAME = 12

The total number of vertices or indices rendered in the last rendered frame. This metric doesn't include primitives from culled objects (either via hiding nodes, frustum culling or occlusion culling). Due to the depth prepass and shadow passes, the number of primitives is always higher than the actual number of vertices in the scene (typically double or triple the original vertex count). Lower is better.

Monitor RENDER_TOTAL_DRAW_CALLS_IN_FRAME = 13

The total number of draw calls performed in the last rendered frame. This metric doesn't include culled objects (either via hiding nodes, frustum culling or occlusion culling), since they do not result in draw calls. Lower is better.

Monitor RENDER_VIDEO_MEM_USED = 14

The amount of video memory used (texture and vertex memory combined, in bytes). Since this metric also includes miscellaneous allocations, this value is always greater than the sum of RENDER_TEXTURE_MEM_USED and RENDER_BUFFER_MEM_USED. Lower is better.

Monitor RENDER_TEXTURE_MEM_USED = 15

The amount of texture memory used (in bytes). Lower is better.

Monitor RENDER_BUFFER_MEM_USED = 16

The amount of render buffer memory used (in bytes). Lower is better.

Monitor PHYSICS_2D_ACTIVE_OBJECTS = 17

Number of active RigidBody2D nodes in the game. Lower is better.

Monitor PHYSICS_2D_COLLISION_PAIRS = 18

Number of collision pairs in the 2D physics engine. Lower is better.

Monitor PHYSICS_2D_ISLAND_COUNT = 19

Number of islands in the 2D physics engine. Lower is better.

Monitor PHYSICS_3D_ACTIVE_OBJECTS = 20

Number of active RigidBody3D and VehicleBody3D nodes in the game. Lower is better.

Monitor PHYSICS_3D_COLLISION_PAIRS = 21

Number of collision pairs in the 3D physics engine. Lower is better.

Monitor PHYSICS_3D_ISLAND_COUNT = 22

Number of islands in the 3D physics engine. Lower is better.

Monitor AUDIO_OUTPUT_LATENCY = 23

Output latency of the AudioServer. Equivalent to calling AudioServer.get_output_latency, it is not recommended to call this every frame.

Monitor NAVIGATION_ACTIVE_MAPS = 24

Number of active navigation maps in the NavigationServer3D. This also includes the two empty default navigation maps created by World2D and World3D.

Monitor NAVIGATION_REGION_COUNT = 25

Number of active navigation regions in the NavigationServer3D.

Monitor NAVIGATION_AGENT_COUNT = 26

Number of active navigation agents processing avoidance in the NavigationServer3D.

Number of active navigation links in the NavigationServer3D.

Monitor NAVIGATION_POLYGON_COUNT = 28

Number of navigation mesh polygons in the NavigationServer3D.

Monitor NAVIGATION_EDGE_COUNT = 29

Number of navigation mesh polygon edges in the NavigationServer3D.

Monitor NAVIGATION_EDGE_MERGE_COUNT = 30

Number of navigation mesh polygon edges that were merged due to edge key overlap in the NavigationServer3D.

Monitor NAVIGATION_EDGE_CONNECTION_COUNT = 31

Number of polygon edges that are considered connected by edge proximity NavigationServer3D.

Monitor NAVIGATION_EDGE_FREE_COUNT = 32

Number of navigation mesh polygon edges that could not be merged in the NavigationServer3D. The edges still may be connected by edge proximity or with links.

Monitor MONITOR_MAX = 33

Represents the size of the Monitor enum.


Method DescriptionsΒΆ

void add_custom_monitor(id: StringName, callable: Callable, arguments: Array = []) πŸ”—

Adds a custom monitor with the name id. You can specify the category of the monitor using slash delimiters in id (for example: "Game/NumberOfNPCs"). If there is more than one slash delimiter, then the default category is used. The default category is "Custom". Prints an error if given id is already present.

func _ready():
    var monitor_value = Callable(self, "get_monitor_value")

    # Adds monitor with name "MyName" to category "MyCategory".
    Performance.add_custom_monitor("MyCategory/MyMonitor", monitor_value)

    # Adds monitor with name "MyName" to category "Custom".
    # Note: "MyCategory/MyMonitor" and "MyMonitor" have same name but different IDs, so the code is valid.
    Performance.add_custom_monitor("MyMonitor", monitor_value)

    # Adds monitor with name "MyName" to category "Custom".
    # Note: "MyMonitor" and "Custom/MyMonitor" have same name and same category but different IDs, so the code is valid.
    Performance.add_custom_monitor("Custom/MyMonitor", monitor_value)

    # Adds monitor with name "MyCategoryOne/MyCategoryTwo/MyMonitor" to category "Custom".
    Performance.add_custom_monitor("MyCategoryOne/MyCategoryTwo/MyMonitor", monitor_value)

func get_monitor_value():
    return randi() % 25

The debugger calls the callable to get the value of custom monitor. The callable must return a zero or positive integer or floating-point number.

Callables are called with arguments supplied in argument array.


Variant get_custom_monitor(id: StringName) πŸ”—

Returns the value of custom monitor with given id. The callable is called to get the value of custom monitor. See also has_custom_monitor. Prints an error if the given id is absent.


Array[StringName] get_custom_monitor_names() πŸ”—

Returns the names of active custom monitors in an Array.


float get_monitor(monitor: Monitor) const πŸ”—

Returns the value of one of the available built-in monitors. You should provide one of the Monitor constants as the argument, like this:

print(Performance.get_monitor(Performance.TIME_FPS)) # Prints the FPS to the console.

See get_custom_monitor to query custom performance monitors' values.


int get_monitor_modification_time() πŸ”—

Returns the last tick in which custom monitor was added/removed (in microseconds since the engine started). This is set to Time.get_ticks_usec when the monitor is updated.


bool has_custom_monitor(id: StringName) πŸ”—

Returns true if custom monitor with the given id is present, false otherwise.


void remove_custom_monitor(id: StringName) πŸ”—

Removes the custom monitor with given id. Prints an error if the given id is already absent.